Opened 5 months ago
Closed 3 months ago
#169 closed Maintenance Repair (Complete)
Piston not going up and down
| Reported by: | Rob | Owned by: | nikos |
|---|---|---|---|
| Priority: | Task | Milestone: | |
| Component: | ET130 Wallace Trailer 1988 | Version: | |
| Keywords: | Cc: | ||
| Blocked By: | Blocking: | ||
| Client: | Client reported: | no | |
| Deadline: | Difficulty: | 1 | |
| Due_Date: | Est Hours: | 1 | |
| Go live date: | Location: | Shop | |
| Priority Order: | 1 |
Description
Poston not holding pressure
Dropped off at Dans Diesel
Reseal kit for Cylinder - getting pricing
lock pins for the trailer are under built - Dans researching for a safer for the road and will get a price
Change History (4)
comment:2 Changed 3 months ago by
Repaired other items found that needed repair.
See Dan's Diesel Invoice # 2258
Additional Work Performed as this would result in our guys bein arrested for operating this in the condition that it was in per Dan.
Issue 1: Repair Hydraulic Cylinder Leak (Remove, Repair + Install)
Issue 2: Trailer Brakes wont Hold
Issue 3: Set screw in pigtail for trailer lights
Issue 4: Piston Leak on Trailer (Wont Lift or Drop)
Issue 5: Cut out Damaged Steel Crossmembers + Repair. Heavy Duty Lock system & Safety pins.
Issue 6: Air Brake Valve back feeding through service glad hand.
Total Cost = $7,980.31
Trailer is now operable and in use.
comment:3 Changed 3 months ago by
| Owner: | changed from Shop to nikos |
|---|---|
| Status: | new → assigned |
comment:4 Changed 3 months ago by
| Resolution: | → Complete |
|---|---|
| Status: | assigned → closed |
NP - Spoke with Dan.
Existing 1" steel shaft does not lock. Will use same design but with 2" steel.
Safety Lock pin was welded and is incorrect. Will correct it so that it can unhook.
$400 - $500 in Material / Steel
$1,500 - $2,500 Labor
$3,000 Max
Other items.
Hydraulics for shaft + seal kit.
$200 - $300 for material
$700 Labor.
Total Max Repair Cost = $3,700 as of 7/19/24.